Reducing Operating Costs

Reducing Operating Costs Using The Latest Technology:

In today’s global market, manufacturers and processors must monitor and scrutinise all costs in order to remain competitive. What many organisations fall fowl of is the false economy of making do with existing older machinery which encompasses older technology. An investment in the latest production technology is always appealing but not always easy to justify. However, when examined closely there can be substantial savings to be made across the whole production operation other than more efficient use of power and not to be forgotten a higher quality product.

Energy Saving Technology:

This is the most obvious place to begin with. AC technology has been developed and is proven to be more energy efficient than the DC alternatives.

Extruders with Energy Efficient AC Technology: Extruders fitted with the latest AC Vector Technology provide precision speed holding and maximum efficiency. AC motors are considerably more energy efficient than the DC alternatives.

Extruders with Direct-Drive Technology: Extruders and Co-Extruders fitted with Direct-Drive Motor to Gearbox Technology ensure maximum power transmission is achieved whilst achieving greater accuracy and eliminating the need for a belt and pulley arrangement. A Belt and Pulley arrangement used by some alternative extruder manufacturers will stretch and therefore result in slippage causing wasted energy and inaccuracy.

Precision Extruder Temperature Control:  Complete control over the temperature heating and cooling zones not only maintains the best conditions for good production from an Extruder but can greatly reduce energy costs at the same time. If temperature control is not kept within a tight scale, massive amounts of energy is wasted trying to maintain the set temperatures by the constant turning on-off of heaters and fans accordingly.

Screw Design: There is no such thing as a “general purpose screw”. The correct screw design will produce the best possible homogenisation of the material, without any over shear and degradation whilst at the same time producing the most efficient output.

Precision Speed Holding Take-Off's / Pullers: Pullers which incorporate the latest AC Flux Vector Technology achieve considerably higher levels of precise speed holding. AC Technology is not only more energy efficient but with more precise speed holding less scrap and off-spec material waste is generated. The performance of the Puller is critical to the overall accuracy of the entire extrusion line and should not be understated.

Close Tolerance Accurate Cutting : Servo Technology enables a higher level of cutting accuracy to be achieved. This reduces the amount of scrap material produced and therefore in turn reduces the amount of compound material required – a further use of machine energy. The elimination of any secondary cut operation to achieve the required cut lengths further reduces the need of any additional energy consuming machinery.